Woka 330x products are spheroidal, agglomerated and sintered powders for thermal spray containing a uniform distribution of 90% tungsten carbide with medium sized carbide grains as a hard phase and 10% nickel as a binder metal. The finer powder particle size distributions produce very tough and dense coatings that can often be used in the as-sprayed condition without post-coat finishing. Coatings made from tungsten carbide materials resist fretting, abrasion, hammer and sliding wear. Woka 3300 series products are most often used for abrasion-resistant coatings in dry environments. Their use at atmospheric temperatures above 500 C (930 F) is not recommended to prevent oxidation of the tungsten carbide. The corrosion resistance of WC-Ni is generally better than that of WC-Co coatings in similar environments, but not as good as coatings of WC-Co-Cr. Woka 3300 series coatings exhibit higher hardness compared to coatings of WC-17Ni (Woka 3500 series products), but have lower toughness. The absence of cobalt allows Woka 3300 series coatings to be used in radioactive environments. HVOF coatings of these materials are dense, show good bond strength and are more homogeneous than coatings applied using atmospheric plasma spray or combustion powder Thermospray coatings.""
Characteristics
| Material type | Thermal Spray Powder |
|---|---|
| Product form | Powder |
| Material safety datasheet number | 50-885 |
| Achieved surface function primary |
Abrasion Protection Cavitation Protection Corrosion Resistance Sliding Wear Protection Solid Particle Erosion Protection |
| Suitable for service environment |
Nuclear/Particle Radiation Seawater/Brackish Water Crude Oil Corrosive Liquid |
| Base composition | Tungsten Carbide |
| Nominal chemistry | WC 10Ni |
| Max. service temp. | 480 |
| Recomm metco spray gun |
2600DJ 2700DJ WokaJet-410 WokaStar-610 |
| Possible spray gun competitor |
GTV K2 Gun GTV Top Gun Praxair HV 2000 Praxair JP 5000 Praxair JP 5220 Stellite Jet Kote |
| Recommended process technology |
Combustion Powder HVOF-GF HVOF-LF |
| Recommended finishing | Diamond Grind |
| Datasheet number | DSM-0308 |