This product is a spheroidal, agglomerated and sintered powder for thermal spraying containing 83% tungsten carbide as hard material and a cobalt matrix, which functions as a binder material for the carbide particles. Coatings provide a higher toughness and fretting resistance than coatings of 88WC 12Co as a result of the higher cobalt levels. Coatings made from tungsten carbide-containing materials protect substrates from the effects of fretting, abrasive grains, particle erosion, sliding wear, hammer wear (impact resistance), cavitation and dynamic contact with hard surfaces. They can be used as an alternative for hard chromium plating when these wear mechanisms are evident and for the recommended service environments and temperatures. This material is not designed for use in aerospace and/or turbine applications and cannot be certified to these specifications. It is, however, an excellent choice for coatings on machine parts, pump seals, extrusion dies and crushing rollers. APS (using a TriplexPro series gun) coatings of this material are dense and show good bond strength. ""
Characteristics
| Material type | Thermal Spray Powder |
|---|---|
| Product form | Powder |
| Material safety datasheet number | 50-886 |
| Previous name | XPT DH-1031 |
| Achieved surface function primary |
Abrasion Protection Fretting Wear Protection Sliding Wear Protection Solid Particle Erosion Protection Impact Resistance |
| Suitable for service environment |
Arid Atmosphere Moderate Atmosphere |
| Base composition | Tungsten Carbide |
| Nominal chemistry | WC 17Co |
| Max. service temp. | 500 |
| Recomm metco spray gun |
11MB 9MB F4MB F4MB-XL SinplexPro TriplexPro-210 |
| Recommended process technology |
Atmospheric Plasma |
| Datasheet number | DSM-0256 |