Choose your country / language

Metco 105NS morphology

Aluminum oxide (alumina) is one of the most widely used engineering ceramics. It is a hard, wear resistant material that is chemically inert and stable at high temperatures. In addition, the high purity grades (i.e. white alumina) exhibit excellent electrical insulation (dielectric characteristics) and thermal conductivity. As a result of these excellent properties and its low cost, alumina finds its use in a number of engineering applications. The material is available in powder form in a range of size distributions and chemistries. Typically applied by atmospheric plasma spray, this material has been used in many applications requiring abrasive, sliding and erosive wear resistance such as wear pads, seal rings, liners etc. High purity alumina is used for electrical, thermal and biomedical applications such as high tension and high temperature insulation, as a substrate for electronic components and for medical implants. Aluminum oxide based coatings should not be used where impact or shock loading occurs. Coatings of Metco 6060 provide good resistance against abrasion, sliding wear, friction and oxidation and are suitable for electronic and electrical applications.""

Characteristics

Material type Thermal Spray Powder
Product form Powder
Material safety datasheet number 50-137
Achieved surface function primary Electrical Insulation
Sliding Wear Protection
Abrasion Protection
Solid Particle Erosion Protection
Suitable for service environment Corrosive Gas
Corrosive Liquid
Melting temperature 2054
Base composition Aluminum Oxide
Nominal chemistry Al2O3 99.5+
Max. service temp. 1650
Recomm metco spray gun 3MB
5P-II
6P-II
9MB
F4MB-XL
SinplexPro
TriplexPro-210
Recommended process technology Atmospheric Plasma
Combustion Powder
Datasheet number DSM-0237

Relevant articles

Article Number Product Size Packaging size
1002818 Amdry 6060 -45 +5 μm 10.0 kg Inquire / Contact Us