Diamond Jet Series HVOF Gas Fuel Spray Guns

The Diamond Jet series supports a wide range of fuel gasses and water or air cooling options.
The coatings produced feature:
- High density
- Low oxide content
- High adhesion to substrate
- Excellent machinability
Industries that typically use these models include:
- Oil and Gas
- Pulp and Paper
- Biomass / Waste Incinerators
- Steel
- Agriculture
Key characteristics
- Choice of configuration
- Modular hardware that is simple to remove and replace
- Low process gas consumption
- Choice of machine-mount and handheld models
Specifications
Process media |
Hydrogen, Methane, Ethylene, Propylene, Propane, Oxygen, Nitrogen (Carrier Gas) |
|
Weight |
From 1.7 kg (3.7 lb) up to 4.1 kg (9 lb) depending on gun model |
|
Controller compatibility |
Machine-mount |
MultiCoat HVOF, UniCoat-GF, UniCoat-GLF, DJC, DJCEH |
Handheld |
DJF with DJFEW |
Extension modules
The extension modules for Diamond Jet guns spray at a 90° angle, and are offered with easy interchangeable spray heads at angles of 45° and 60°. All modules offer a shaft length of 610 mm (24 in) for access to internal surfaces.
Gun Model |
Cooling |
Spray head angle |
Shaft length |
Min. bore diameter |
DJT-2 |
Water |
90° |
610 mm (24 in) |
400 mm (16 in) |
DJT-2 |
Water |
45° |
280 mm (11 in) |
|
DJT-2 |
Air |
90° |
230 mm (9 in) |
|
DJT-2 |
Air |
45° |
180 mm (7 in) |