Choose your country / language

Additive Component Manufacturing

We’re integrating and scaling the entire Additive Manufacturing value chain.

With a site that covers 125,000 square feet and dedicates more than 50,000 square feet to printing alone, our Huntersville facility provides tremendous value to customers across the board. Our capabilities span from end-to-end engineering to vertically integrated manufacturing. Our AM dedicated facility currently houses 26 metal AM printers along with a wide range of post processing capabilities such as heat treatment, CNC machining, surface finishing, and inspection. Our operation is supported by a comprehensive metallurgy and materials lab and a robust powder management system.

Metal AM Equipment and Printing Capabilities

Printers Print Volume Laser Materials
1x AMCM M4K-4 450x450x1000mm 4x 1000W AlSi10Mg
7x EOS M400-1 400x400x360mm 1x 1000W AlSi10Mg, Al7050-RAM2, CP1, Inconel 718, Inconel 625, NiCP, 316L, Invar 36, 
1x EOS M400-4 400x400x360mm 4x 400W Inconel 718, Inconel 625, NiCP
5x EOS M290 280x280x350mm 4x 1000W AlSi10Mg, Al7050-RAM2, CP1, Ti-64Al-4V
6x Trumpf TruPrint 5000 Ø 300x400mm 3x 500W Inconel 718, Inconel 625
6x Concept Laser M2 245x245x350mm 2x 400W Inconel 718, 625, HX, C22, H282

Excellence is ingrained in our operations, evident through our AS9100 and ISO 9001 certifications, along with ITAR registration and FFL. 

Contact us

Additive Component Manufacturing

AMCM M4K-4

Additive Component Manufacturing

EOS M400

Additive Component Manufacturing

EOS M290

Additive Component Manufacturing

Trumpf TruPrint 5000

Additive Component Manufacturing

Concept Laser M2

    • pdf (7.96 MB, 2024)

      Metal Additive Manufacturing Brochure

    • pdf (1.57 MB)

      Additive Manufacturing Solutions for Semiconductor Capital Equipment

© Copyright 2025 OC Oerlikon Management AG

Back to top keyboard_arrow_up

keyboard_arrow_up