Choose your country / language

More than 4 million tons installed production capacity worldwide speak for themselves.

The right solution for every demand

Oerlikon Neumag staple fiber plants stand for highest product quality and absolute reliability.

2-step Staple Fiber Bales Plant Solutions
2-step Staple Fiber Bales Plant Solutions
2-step Staple Fiber Bales Plant Solutions

Commodity and specialties

Oerlikon Neumag´s two-step staple fiber plants are designed to meet highest quality requirements at minimum operation cost. The largest plants with production capacities of up to 300 t/d guarantee high production yields under absolutely stable conditions for the production of high quality PET cotton type fibers.

Beyond this, Oerlikon Neumag offers two-step lines for the production of staple fibers with most different properties out of PET, PP, PA  or bicomponent for a wide variety of applications like hygiene or medical products, geotextiles or concrete reinforcements.

A major competitive advantage of the 300 tons per day staple fiber plant for commodity fibers from Oerlikon Neumag is the considerably higher profitability per ton compared to smaller plants, which relies heavily on the energy efficiency of the new large-scale plant.

Oerlikon Neumag technology offers a further advantage with the possibility of coloring fibers directly in the spinning process. Because the large plants are always connected to a polycondensation plant, fibers cannot be colored until processing. With side stream extrusion, however, the master batch can be mixed directly into the spinning process. This means, for example, that black fibers can be pro-duced directly. Later coloring is no longer necessary.

Yet it is not only commodity fibers that are produced in the two-step process but bicomponent fibers, too. Here, Oerlikon Neumag offers solutions for self-crimping fibers, binding fibers, super microfibers and hollow fibers, for example. The plant manufacturer from Neumünster has many years of experience in this area. The first staple fiber plant for bicomponent fibers was commissioned in 1995.

In addtion to cotton type and bicopmponent fibers other special fibers can be optimally produced in the two-step process

  • PP fibers for hygiene nonwovens
  • PP short cut fibers for concrete reinforcements
  • PET hollow fibers for insulation and filling
  • PET fibers for geotextiles and other needled felts
  • PLA fibers  for apparel

Your benefits

  • Higher profitability per ton fiber
  • Capacities up to 300 tons per day
  • Titer range: 0.9 - 70 dtex
  • Various fiber types: sheath/core, side-by-side, island in the sea, trilobal, orange-type
  • Various polymer combinations: PET/coPET, PET/rPET, PET/PA6, PP/PE, PA6/PE, and more

Feedback or questions? Get in touch with us!

keyboard_arrow_up