Components High performing surface solutions for mechanical engineering components

Mechanical engineering components frequently operate under extreme conditions: high loads, high sliding speeds and/or poor lubricating conditions can lead to wear or excessive friction and, thereby, to reduced service lifetime and/or efficiency. Carbon based PVD and DLC coatings are today considered the most effective surface solutions for gears, roller bearings, pumps, compressors, linear guides, ball screw drives, collet chucks, worm gears, and weaving and spinning machines.
Oerlikon Balzers’ coating solutions provide a range of benefits:
- Low friction
- High hardness
- Dry running
- Good wear resistance
- Good adhesion
Oerlikon Balzers' coatings decisively enhance the reliability, service life and performance of components. Even parts that directly contact the processed material, and are thus subject to heavy wear, are effectively protected. BALINIT® coating of mechanical engineering components moreover permits the use of more environmentally friendly coolants and lubricants, and even dry running.
-
BALINIT C (WC/C) coating of spur gears, bevel gears or planetary gears reduces the danger of galling, …
-
BALINIT C (WC/C)- coated rings, rollers or balls improve lifetime under poor lubricating conditions or in …
-
BALINIT C (WC/C) - and BALINIT DLC coating of plungers, valve plates or shoes reduce stick- slip of large …
-
BALINIT DLC coating of the shafts of centrifugal pumps reduces abrasive wear through polymer sealing. BALINIT …
-
BALINIT DLC coating of plungers, wrist pins and crossheads reduces the danger of galling and increases piston …
-
BALINIT D (CrN) coating of vanes allows air conditioning compressors to run with environmentally friendly …
-
BALINIT C (WC/C) coating of ball screw drive balls increases service life and enhances dynamic.
-
BALINIT C (WC/C) coating of the steel screws of worm-gear positioning drives significantly reduces bronze …
-
BALINIT DLC coating of clamping elements enables sustained clamping force without signs of wear and galling.
-
Weaving reed dents and air jet nozzles
-
Opening cylinders of spinning machines
-
BALINIT DLC or BALINIT DLC STAR protect shaft against seal abrasion
-
BALINIT C (WC/C) increases the pitting resistance of high speed spindle bearing rings. The coated raceways …
-
Pneumatic spools frequently operate without lubrication.
-
The low friction of BALINIT® MILUBIA improves the durability of ceramic shafts and bearings enhancing the …