Choose your country / language

BALDIA COMPACT DC
BALDIA COMPACT DC
BALDIA COMPACT DC
Image source/Bildquelle: ZECHA Hartmetall-Werkzeugfabrikation GmbH

Image source/Bildquelle: ZECHA Hartmetall-Werkzeugfabrikation GmbH

BALDIA COMPACT DC

In special applications where every micron counts when machining compacted and sintered powders such as graphite, hard metals and ceramics, BALDIA® COMPACT DC is the best choice.

BALDIA® COMPACT DC allows the tightest tolerances in tool diameter and coating thickness, resulting in consistently high tool performance with tight bore tolerances, achieving extremely high finishing accuracy.

With BALDIA® COMPACT DC, you also benefit from an enhanced quality control and special chemical pre-treatment of the substrate.

BALDIA COMPACT DC
Coating material C-based (sp3)
Coating technology CVD
Coating colour grey
Coating hardness HIT [GPa]* 80 - 100
Max. service temp. [°C]**** 600
Process temperature [°C] < 900
Typical coating thickness [µm] 4 - 15
General remark All given data are approximate values, they depend on application, environment and test condition.
*Coating hardness HIT [GPa] Measured by nano indentation according to ISO 14577. For multilayers the hardness of the different layers varies. Hardness can be adapted to the application.
****Max. service temp. [°C] These are approximate values out of the field. Due to thermodynamic laws there is a dependency of pressure in application.

Feedback or questions? Get in touch with us!

keyboard_arrow_up