\uf1ad

BALINIT PROTECREACH compliant coatings for enhanced protection on industrial gas turbine compressors

×
BALINIT PROTEC for enhanced protection on industrial gas turbine compressors
BALINIT PROTEC for industrial gas turbine blades

Solid Particle Erosion (SPE), Liquid Droplet Erosion (LDE) and corrosion of turbine blades are three key defects that significantly influence the performance of gas turbine compressors. This should not be underestimated as the resulting decrease in efficiency will cause an increase in cost for your plant.

BALINIT® PROTEC by Oerlikon Balzers is a REACH-compliant coating especially developed to protect industrial gas turbine compressors from corrosion and erosion. Moreover, this new PVD coating can substantially improve the efficiency of compressors.

As a leading global supplier of surface solutions with almost 75 years of experience, based on a strong R&D department, we at Oerlikon Balzers understand the needs of our customers. This has always been our motivation to passionately develop the right PVD coating solution in close partnership - perfectly tailored to your needs.

  • Advantages

    Advantages

     
    EU REACH compliant
     > 
    BALINIT® PROTEC does not use the toxic and hazardous hexavalent Cr-VI
    Reduction of cavitation from Water Droplet Erosion (WDE) caused by fogging and wet compression systems
     > 
    Increased asset life and compressor protection
    Enhanced protection from Solid Particle Erosion (SPE)
     > 
    Outperforms the current industry standard galvanic sacrificial coatings
    Superior surface finish
     > 
    Improved efficiency with standard surface smoothness of Ra < 0.8 µm
    Surface finish can be further enhanced by post polishing
    Increased corrosion protection on gas turbine compressors
     > 
    Has passed the ASTM B117 salt fog and OEM sulphur tests

    BALINIT® PROTEC
    Advanced REACH compliant protection with a NEW PVD corrosion resistant coating

  • Specifications

    Specifications

    BALINIT PROTEC
    Coating colour grey
    Coating hardness HIT[GPa]* 20 +/- 1
    Max. service temp. [°C]**** 1000
    Coating temperature [°C] < 500
    Typical coating thickness [µm] 5 - 25
    General remark All given data are approximate values, they depend on application, environment and test condition.
    *Coating hardness HIT[GPa] Measured by nano indentation according to ISO 14577. For multilayers the hardness of the different layers varies.
    ****Max. service temp. [°C] These are approximate values out of the field. Due to thermodynamic laws there is a dependency of pressure in application.
  • Downloads
  • Applications

    Recommended applications

    Components applications

    • Industrial Gas Turbines Industrial Gas Turbines

      IGT components face extreme temperature, hot gas corrosion and particle erosion stress.

      Details
Contact us